HOME WSM PRODUCT INFO COOKING TOPICS OPERATING TIPS & MODS VIDEOS RESOURCES FORUMS SHOPPING
The Virtual Weber Bullet  
The Virtual Weber Bullet    The Virtual Weber Bulletin Board  Hop To Forum Categories  Kitchen Equipment & Gadgets    Worst Kitchen Tool Ever: Can Opener
Go
New
Find
Notify
Tools
Reply
  
4-star Rating (1 Vote) Rate It!  Login/Join 
TVWBB Emerald Member
Picture of Steve Petrone
Posted
The only reliable one I've seen are the supper HD for food service size cans mounted on a work bench. Every other opener fails.


Peach Kissed Q
 
Posts: 2596 | Location: Charlotte, NC | Registered: January 05, 2005Reply With QuoteEdit or Delete MessageReport This Post
TVWBB Fan
Posted Hide Post
A good old P-38 always works! Wink
 
Posts: 121 | Location: North Little Rock, AR | Registered: May 10, 2007Reply With QuoteEdit or Delete MessageReport This Post
Moderator
TVWBB Hall of Fame
Picture of Chris Allingham
Posted Hide Post
I've used the Kuhn Rikon brand safety can opener for many years and have been very happy with it. I prefer a safety can opener because neither the lid or inside of can is sharp, making both easy to handle and easy to clean for recycling without worrying about cutting yourself.

Cook's Country (a Cook's Illustrated PBS TV show) rated can openers in Oct. 2008 and declared the OXO magnetic locking can opener the winner:

Oxo Good Grips i-Series Can Opener

Amazon does not call it "magnetic locking", but you can see it's the same model as on the OXO site:

OXO Good Grips magnetic locking can opener

Here's the entire review:

Published October 1, 2008.

Which model blows the lid off the competition?

List of products tested:

•Magnetic Locking Can Opener by Oxo
•Kuhn Rikon Slim Safety Lidlifter
•Progressive International Safety I-Can Opener
•Good Cook 4-1 HT Safe Can Opener
•Zyliss Safe Edge Can Opener
•Miu CanDo Safety Can Opener
•Chef'n EZ Squeeze 1-Handed Can Opener
•CIA Masters Collections Side Can Opener

We tested six safety openers as well as two traditional openers boasting “safer” operation; all models are priced under $20.

ATTACHMENT ISSUES
: Efficiency starts with locking onto the cans. Safety can openers come in two basic designs: top mounting and side mounting. Side-mounting openers proved to be much less intuitive for first-time users; testers had particular difficulty getting one opener to attach. Top-mounting openers (their turning cranks are parallel to the counter) attach by scissor action; two models were especially easy to attach. The two traditional can openers have locking mechanisms with push-button releases; this worked great on one, but several testers had trouble disengaging the another opener from the cans.

EASE OF OPERATION
: Testers preferred openers with easy, smooth-turning motions. The biggest loser here was a safety opener, which required too much muscle to use comfortably. Handles on two openers were angled so that short tuna cans tilted and spilled liquid when not opened with the handle hanging over the counter: a major flaw. Left-handed and right-handed testers had similar experiences with all models tested.

SAFETY MATTERS
: Whether a lid is sharp (from a traditional opener) or dull-edged (from a safety opener), the danger lies in having to handle it; the best openers allow no-touch lid disposal. Two safety openers had metal pincers that gripped the lid for safe disposal. The side-mounting safety openers were downgraded for lacking mechanisms for no-touch lid disposal. The two traditional openers we included had magnets designed for no-touch lid disposal.

SUMMING UP
: In opening over 120 cans, we found that there isn’t a single style of opener that works best. Our surprise winner left sharp edges, but its lid-catching magnet made disposing of the lid easy and safe. This opener was intuitive, comfortable, and efficient.

Winner

Magnetic Locking Can Opener by Oxo
Intuitive, efficient, and comfortable, this traditional opener topped our testing.
 
Posts: 5759 | Location: San Jose, CA | Registered: November 10, 1999Reply With QuoteEdit or Delete MessageReport This Post
TVWBB Emerald Member
Picture of Steve Petrone
Posted Hide Post
Thank you Chris. Looks like you have two good answers to the problem.
Chris, how do you drain tuna when you remove the top from the side. My habit is to to use a traditional cut from the top opener and push the top in expressing the excess liquid. Probably not the most sanitary way but it is an old habit. It seems as tho you must use another method.


Peach Kissed Q
 
Posts: 2596 | Location: Charlotte, NC | Registered: January 05, 2005Reply With QuoteEdit or Delete MessageReport This Post
Moderator
TVWBB Hall of Fame
Picture of Chris Allingham
Posted Hide Post
quote:
Originally posted by Steve Petrone:
Chris, how do you drain tuna...
Sorry, can't help you there cuz I don't like canned tuna and don't buy it!

Since the OXO is a traditional opener, it should be able to support your tuna liquid "expression".

Regards,
Chris
 
Posts: 5759 | Location: San Jose, CA | Registered: November 10, 1999Reply With QuoteEdit or Delete MessageReport This Post
TVWBB Emerald Member
Picture of Shawn W
Posted Hide Post
someone gave me a Tupperware can opener for Christmas

it doesn't cut, it undoes the crimp

pretty neat, not sure if this is the same as those other safe can openers

aside from the pincers used to grab the lid which could have been done better I've been very impressed with it

This message has been edited. Last edited by: Shawn W,
 
Posts: 3008 | Location: Calgary, Alberta, Canada | Registered: June 01, 2004Reply With QuoteEdit or Delete MessageReport This Post
TVWBB Super Fan
Posted Hide Post
I find the "semi-basic" hand-held to work almost better than anything else that I've tried:

I look for the Oxo or Swing-Away type with the following features:
-Large T-handle that you turn. These require very little effort to turn - even on relatively heavy-guage or large cans.
-Spur-like "sprockets" that engage the cutter wheel and the drive wheel

I feel that most electrics are simply a waste of counter-space. I've owned a Krups safety opener, and threw the POS out - it was a pain to get it consistently engaged to any size can. Plus, the way it opened cans - you could place the lid back on, but they wouldn't drain to save your life.

I just try to be careful with the sharp edges (a good, sharp, traditional opener does not leave the edges all THAT sharp), and would also rather have opened lids that are conducive to draining via the lid.
 
Posts: 282 | Location: Wauwatosa, WI USA | Registered: April 22, 2008Reply With QuoteEdit or Delete MessageReport This Post
TVWBB Wizard
Posted Hide Post
Ron brings up a good point. Chris, and special problem with draining operation as a result of how the KR style cuts the lid?


Ray
WSM*Weber Performer
 
Posts: 1694 | Location: Southeastern PA | Registered: October 02, 2007Reply With QuoteEdit or Delete MessageReport This Post
TVWBB Olympian
Picture of Bryan S
Posted Hide Post
Went through a lot of can openers over the years till I bought an Oxo Good Grips opener about 5 years ago. It's the regular one, opens the can from the top. I use the opener at least once everyday. Best Damn opener ever for me. Wink The Kitcheaid openers are about the worst ever for me. YMMV


"When I die, I'll donate my body to science too see how big my smoke ring is "
Lump, It's what I'm cooking over. Chris A, Thanks for letting me play here.
 
Posts: 8477 | Location: Lancaster, Pa | Registered: July 05, 2002Reply With QuoteEdit or Delete MessageReport This Post
TVWBB Super Fan
Posted Hide Post
I have the Oxo that uncrimps the lid: no sharp edges, no metal flakes in the food.

Steve, I used to drain my tuna the exact same way, so I got something like this which works fine on everything from tuna to canned beans, etc. I *think* I got mine at Bed Bath and Beyond for just a couple of bucks.

This message has been edited. Last edited by: Chris Allingham,
 
Posts: 425 | Location: NJ | Registered: March 29, 2008Reply With QuoteEdit or Delete MessageReport This Post
TVWBB Super Fan
Picture of Phil Perrin
Posted Hide Post
The swing away is inexpensive and works very well. And is available most every where.


Hi,my name is Phil,and I'm a Q-A-Holic! :-)
 
Posts: 492 | Location: Charlotte,NC | Registered: April 25, 2008Reply With QuoteEdit or Delete MessageReport This Post
TVWBB Super Fan
Posted Hide Post
I too have many kitchen-aide can openers that are worthless.

My dad found an amazing one made by Victorinox/Forschner and it's only ~$10. It's the only one I've seen that can actually finish the job. It's really a high quality piece. And as a bonus, it has a solid beer bottle opener on top.

http://www.amazon.com/exec/obi...N/B00092PO1O/tvwb-20

This message has been edited. Last edited by: Chris Allingham,


OTS 22.5" • WSM 18.5" • SJP (18.5") • Q 300 ....sounds like some sort of secret code
 
Posts: 289 | Location: Providence, Rhode Island | Registered: January 23, 2008Reply With QuoteEdit or Delete MessageReport This Post
New Member
Posted Hide Post
quote:
Originally posted by Steve Petrone:
Thank you Chris. Looks like you have two good answers to the problem.
Chris, how do you drain tuna when you remove the top from the side. My habit is to to use a traditional cut from the top opener and push the top in expressing the excess liquid. Probably not the most sanitary way but it is an old habit. It seems as tho you must use another method.


I've used a safety can opener for years. To drain liquids from tuna, peas, etc., I've used a "can collander" (see link). You can pick them up for a couple bucks on the utensil aisle at your local grocery store.

http://www.amazon.com/PROGRESS...id=1244247586&sr=8-2
 
Posts: 23 | Location: Atlanta, GA via New Orleans | Registered: December 31, 2004Reply With QuoteEdit or Delete MessageReport This Post
TVWBB Member
Posted Hide Post
quote:
Originally posted by Chris Allingham:
I've used the Kuhn Rikon brand safety can opener for many years and have been very happy with it. I prefer a safety can opener because neither the lid or inside of can is sharp, making both easy to handle and easy to clean for recycling without worrying about cutting yourself.

Cook's Country (a Cook's Illustrated PBS TV show) rated can openers in Oct. 2008 and declared the OXO magnetic locking can opener the winner:

Oxo Good Grips i-Series Can Opener

Amazon does not call it "magnetic locking", but you can see it's the same model as on the OXO site:

OXO Good Grips magnetic locking can opener

Here's the entire review:

Published October 1, 2008.

Which model blows the lid off the competition?

List of products tested:

•Magnetic Locking Can Opener by Oxo
•Kuhn Rikon Slim Safety Lidlifter
•Progressive International Safety I-Can Opener
•Good Cook 4-1 HT Safe Can Opener
•Zyliss Safe Edge Can Opener
•Miu CanDo Safety Can Opener
•Chef'n EZ Squeeze 1-Handed Can Opener
•CIA Masters Collections Side Can Opener

We tested six safety openers as well as two traditional openers boasting “safer” operation; all models are priced under $20.

ATTACHMENT ISSUES
: Efficiency starts with locking onto the cans. Safety can openers come in two basic designs: top mounting and side mounting. Side-mounting openers proved to be much less intuitive for first-time users; testers had particular difficulty getting one opener to attach. Top-mounting openers (their turning cranks are parallel to the counter) attach by scissor action; two models were especially easy to attach. The two traditional can openers have locking mechanisms with push-button releases; this worked great on one, but several testers had trouble disengaging the another opener from the cans.

EASE OF OPERATION
: Testers preferred openers with easy, smooth-turning motions. The biggest loser here was a safety opener, which required too much muscle to use comfortably. Handles on two openers were angled so that short tuna cans tilted and spilled liquid when not opened with the handle hanging over the counter: a major flaw. Left-handed and right-handed testers had similar experiences with all models tested.

SAFETY MATTERS
: Whether a lid is sharp (from a traditional opener) or dull-edged (from a safety opener), the danger lies in having to handle it; the best openers allow no-touch lid disposal. Two safety openers had metal pincers that gripped the lid for safe disposal. The side-mounting safety openers were downgraded for lacking mechanisms for no-touch lid disposal. The two traditional openers we included had magnets designed for no-touch lid disposal.

SUMMING UP
: In opening over 120 cans, we found that there isn’t a single style of opener that works best. Our surprise winner left sharp edges, but its lid-catching magnet made disposing of the lid easy and safe. This opener was intuitive, comfortable, and efficient.

Winner

Magnetic Locking Can Opener by Oxo
Intuitive, efficient, and comfortable, this traditional opener topped our testing.


I bought an Oxo i-series can opener and it made me realize that all the other can openers that I've ever used didn't compare to the Oxo. It is without a doubt the best can opener that I've ever used.


18" WSM
22.5" OTG
 
Posts: 79 | Location: Kansas | Registered: October 09, 2005Reply With QuoteEdit or Delete MessageReport This Post
TVWBB Super Fan
Posted Hide Post
The Oxo I-Series looks like a nicer, heavier version of the Swing-Away that I like.

It still has the primary features that I look for:
-The conventional top-cutting wheel
-Sprocket interlock between drive wheel that grips the rim and the cutting wheel
-A nice, long twist handle to provide leverage for easy operation.

Plus, the rounded construction and a magnet to catch the lids. Sounds like a winner. (In about 50 years, when my Swing-Away dies or gets dull, maybe they'll have an improved version that will work for my weak hands, if I'm still kickin' Wink)
 
Posts: 282 | Location: Wauwatosa, WI USA | Registered: April 22, 2008Reply With QuoteEdit or Delete MessageReport This Post
TVWBB Fan
Picture of Robert Black
Posted Hide Post
quote:
Originally posted by Scott Foreman:
A good old P-38 always works! Wink

Walther P38
Yep, that'll take the top off!


This one will also:
P-38 Lightning


"I keep thinking we should include something in the Constitution in case the people elect a frickin' moron." George Washington
Weber Performer 2005, Weber One Touch Gold, Genesis 1000 & 2000 being rebuilt. Brinkmann Smoke'N Grill and UDS named "BLACK BETTY"
 
Posts: 141 | Location: SC | Registered: June 11, 2009Reply With QuoteEdit or Delete MessageReport This Post
  Powered by Eve Community  
 

The Virtual Weber Bullet    The Virtual Weber Bulletin Board  Hop To Forum Categories  Kitchen Equipment & Gadgets    Worst Kitchen Tool Ever: Can Opener

© 1997-2009 Chris A. Allingham LLC
The Virtual Weber Bullet is an unofficial Weber product fan site and is not affiliated with the Weber-Stephen Products Co.